IMPACT-P(NA) is easily and quickly applied as a dry product using a seed spreader or broadcaster. It is non-toxic and non-corrosive and can be safely applied onto the litter at any time, before or after birds are placed.
Directions:
Apply IMPACT-P(NA) on top of the litter after decaking, stripping, windrowing, or adding a fresh top-coat of litter. If using an acid ammonia reduction chemical, wait at least 5-7 days before applying IMPACT-P(NA) to allow the temporary acidic conditions caused by the products to wear off. The low pH resulting from the use of ammonia reduction chemicals kills bacteria and will retard the growth of IMPACT-P(NA) bacteria.
The minimum application rate is 1 lb. / 1,000 sq. ft. of floor space:
- 20 lbs. pail treats 20,000 sq. ft.
- 25 lbs. pail treats 25,000 sq. ft.
Use a seed spreader or broadcast spreader to evenly apply the IMPACT-P(NA) by walking a horseshoe around the outside drinker lines and again around the inside of the drinker lines. This ensures whole-house coverage and overlap in the feed and water areas where the highest nutrient buildups occur during growout.
IMPACT-P(NA) will not conflict with beetle products or vaccines. It is safe to apply at any time during the growout, but is most effective if applied as near the beginning of the flock as possible.
